| |
Our Price: $1,490.00
100 Organ Needles Free!
Machine price includes a knocked down table, stand and motor
Instruction manual
100 Organ Needles Free!
|
|
Juki DNU-1541S Walking Foot Upholstery with Safety Clutch
The Safety Clutch is for retiming. If the needle hits the foot plate or hook hard to untime you can hold the silver button down and turn the handwheel backwards to retime.
- Single Needle
- Needle Feed And Walking Foot
- Up to 2500 Stitches Per Minute
- Up to 9 Mm Stitch Length
- Industrial Upholstery Machine
- Safety Clutch Button right of needle plate for Retiming
- With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness
- Alternating vertical movements of the walking foot and presser foot are as large as 6.5 mm
- In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes
- Rectangular feed prevents needle from fraying
- Sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering
- When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged
- Stitch length can be easily selected by the stitch dial
- Includes a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel
- Knee-lifter mechanism is built in the bed which reduces the pressure required to operate facilities setup
- Machine's full open-type top design makes adjusting works easier
- Machine comes with a lubricating mechanism that uses a centralized oil wick which substantially reduces the time and trouble required for oiling the machine
- A walking foot mechanism is built into the machine arm to prevent oil from scattering
- Stitch length: 9 mm
- Needle bar stroke: 36 mm
- Presser foot lift clearance by hand: 9 mm
- Presser foot lift clearance by knee: 16 mm
- Hook type: Horizontal-axis full-rotary double-capacity hook
- Needle: 135 x 17
- Thread: #30
- #5, B46
- B138, Nm=60/3
- 15/3
- Distance from needle to machine arm: 10.3"
- Weight of machine head: 80.47 lbs
- UL Listed
|
|
