| |
Our Price: $2085.00
Machine price includes a knocked down table, stand and motor
Includes:
Instruction manual
Accessory Pack
100 Regular Industrial Needles Free!
|
|
Juki LU1508 Upholstery Sewing Machine & Power Stand
Reduced lift of feed dog helps prevent the material from flopping
and reduces operating noise and vibration
- New mechanism with a rectangular feeding motion promises consistent
feed of materials of all thickness without the risk of stitch gathering
- Compared with elliptical feed, rectangular feed helps reduce gathered
stitches
- With adoption of a new rectangular feed mechanism, an alternating
vertical movement mechanism and a unison feed mechanism helps feed
heavyweight materials powerfully and smoothly
- Well tensed seams are consistently produced without pitch errors
- With its maximum stitch length of 9 mm, the machine can be applied
to a broader range of uses
- Stitch length can be easily selected by the stitch dial
- Many improved features offer enhanced operability such as an easy-to-observe
area around the needle, placement of bobbin winder on the front face,
and a large handwheel
- Knee-lifter mechanism built-in to bed reduces pressure required
to operate the knee-lifter
- Full-open-type top design makes it possible to fully open the top
of the machine arm and helps make adjustment easy without tilting
the machine head
- Alternating vertical movement mechanism prevents irregular stitches
- High 16 mm presser foot lift enables easy material handling
- Since machine incorporates a vertical-axis double-capacity hook,
the frequency of bobbin thread replacement is reduced, further increasing
efficiency
- If thread gets caught in the hook, the safety device is automatically
engaged, preventing possible hook damage
- Pressing the reset button will immediately return the machine back
to the normal state
- Maximum stitch length: 9 mm
- Needle bar stroke: 36 mm
- Alternating vertical movement: 2.5 mm - 6.5 mm
- Thread take-up: slide type
- Hook: Vertical-axis, double-capacity hook
- Needle: 135x17 Nm160
- Thread: #30~#5, B46~B138
- Weight: 93.7 lbs
|
|
